We specialize in 3D manufacturing and design. Our first product launch will be the Blade Guard Downtube Protector.

It is a modular downtube protector engineered to defend your mountain bike frame against high-velocity rock strikes and impacts. This can prevent carbon fiber delamination and lessen aluminum deformation.

It utilizes patent-pending Omni-Shield Technology, featuring a 72D outer shell, a 95A rubber barrier, and a variable-density progressive lattice infill to absorb and dissipate impact energy.

The interlocking tabs require some mechanical force to secure. Usually even pressure on a tabletop is enough.

If needed, you can also use a firm stomp technique with clean shoes or a rubber mallet to ensure the pieces snap completely flush.

The segments mount to the frame using industrial-strength 3M 300LSE adhesive. Proper surface preparation with isopropyl alcohol is required prior to application.

Removal requires applying gentle heat to soften the 3M adhesive, followed by slowly peeling the segments away from the frame.

No way!

The 300LSE adhesive stays together like a gummy sheet. It will come off leaving your frame in it’s original condition.

All Aether Labs MTB products are 3D printed and proudly Made in the USA.

The Blade Guard is printed using standard engineering filaments and is available in matte and glossy finishes. We are always expanding our offerings so stay tuned!